Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Front bumper

Before starting, open the front bonnet of your Citroen C3. Begin by unscrewing and removing the screws located on the upper side of the bumper using a Torx screwdriver. Next, unscrew and remove the screws located in the front wheel arches. Once done, unscrew and remove the bolts located on the lower side of the bumper. By doing this, you will have freed the front bumper. At this point, disconnect and extract the bumper from its housing, and you will have successfully completed the disassembly.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Front Bumper of the Citroen C3
How to Remove and Replace the Front Bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Here are the instructions on how to remove and replace the front bumper of the Citroen C3. First, open the bonnet of the vehicle and start removing a…
How to disassemble and replace the front bumper of the Citroen C3
How to disassemble and replace the front bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's video will show us how to disassemble and replace the front bumper of the Citroen C3. First, we open the hood of the car and start unscrewing…
Removing the Front Bumper of the Citroen C3
Removing the Front Bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Below are the instructions to remove and replace the front bumper of the Citroen C3. First, open the bonnet of your car and start unscrewing the fixi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos