Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bumper and Front Headlights on Citroen C3 MK1

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Front bumper

See other generations:
Video tutorial

Today, you will see the instructions that will allow you to remove the front bumper and front headlights on a first-generation Citroen C3. First, open the bonnet and unscrew all the screws securing the front grille, removing it; then unscrew the additional screws found underneath, as shown in the video.

At this point, unscrew the fixing screws located on both sides of the wheel arches and the lower screws of the bumper; then gently detach the front bumper, starting from the sides, before unscrewing the screws of the front lights!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Citroen C3
How to Remove the Front Bumper from a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the front bonnet of your Citroen C3. Begin by unscrewing and removing the screws located on the upper side of the bumper using …
How to Remove the Rear Bumper of a Citroen C3
How to Remove the Rear Bumper of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the rear bumper of a Citroen C3? Follow these steps: using a screwdriver or battery-powered drill, unscrew the securing pins locate…
How to disassemble and replace the front bumper of the Citroen C3
How to disassemble and replace the front bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's video will show us how to disassemble and replace the front bumper of the Citroen C3. First, we open the hood of the car and start unscrewing…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos