Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Rear bumper

How do you remove the rear bumper of a Citroen C3? Follow these steps: using a screwdriver or battery-powered drill, unscrew the securing pins located at the top of the bumper. Unscrew the screws located at the bottom of the bumper, then remove the screws located at the sides of the wheel arch liners; disassemble the two rear lights and take them out of the vehicle body. Once the bumper is free from any screws or pins, grip it with your hands and pull it away from the bodywork (disconnect any power cables if present). Finally, fit the new bumper following the disassembly steps.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Citroen C3
How to Remove the Rear Bumper of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before starting, open the tailgate of your Citroen C3. Begin by unclipping and removing the plastic clips that secure the bumper. Next, unscrew and r…
How to remove the rear bumper from a Citroën C3?
How to remove the rear bumper from a Citroën C3?
Citroen C3 (2009-2016 / SC) To remove the rear bumper from a Citroën C3, open the bonnet and remove the side grilles inside the boot, near the lights. Inside the grilles, there …
How to Remove the Rear Light on a Citroen C3
How to Remove the Rear Light on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Is the rear light of your car broken? Here’s how to remove and replace the rear light. Remove the inspection cover located at the side of the boot an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos