Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fix the bumper frame of a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Rear bumper

In this interesting video, we see how to fix the parts of a bumper together without the use of a welder, which would normally be necessary for this job. This is a professional tool that, if you are just DIY enthusiasts, you probably do not own or intend to purchase, as it is very expensive. However, the YouTuber shows us the correct method for joining the two parts securely: a two-component plastic glue, with the only caution being to place small screws in the corners that will better join the two pieces, and that will be removed when reassembling the bumper on the car.

Posted on 14 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Citroen C3
How to replace the battery of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) The selected video tutorial shows the steps to be taken in order to replace the battery of a Citroen C3 car. The battery is located in the engine com…
How to disassemble the door panel of a Citroen C3
How to disassemble the door panel of a Citroen C3
Citroen C3 (2009-2016 / SC) In today's guide, we are shown how to remove the door panel of a Citroen C3, model produced from 2009 to 2016. We start the procedure by removing the…
How to reset the tire pressure sensor on a Citroen C3
How to reset the tire pressure sensor on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) After changing the tires with seasonal ones or after replacing or repairing one or more flat tires, a tire pressure warning light will come on in the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos