Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Front bumper

Below are the instructions to remove and replace the front bumper of the Citroen C3. First, open the bonnet of your car and start unscrewing the fixing screws located at the top of the bumper using a screwdriver or a Torx key; then remove the bumper grille, as shown in the video. At this point, unscrew the additional Torx screws found underneath, then unscrew the screws located on both sides of the wheel arches; gently unclip the bumper from the sides until it is completely removed!

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the front bumper of the Citroen C3
How to disassemble and replace the front bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's video will show us how to disassemble and replace the front bumper of the Citroen C3. First, we open the hood of the car and start unscrewing…
How do you remove the front bumper on the Citroen C3 3?
How do you remove the front bumper on the Citroen C3 3?
Citroen C3 (2016-2023 / SY, SX) It may seem strange, but cars, in most cases, have standard procedures for carrying out certain bodywork tasks, such as in this case, the removal of …
How to Remove the Front Headlight of a 2008 Citroen C3
How to Remove the Front Headlight of a 2008 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today, you will learn how to remove the right and then the left front headlight of the 2008 Citroen C3. The steps are quite simple: First, open the b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos