Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3
  6. : How do you remove the rear bumper of the Citroà «n C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Rear bumper
Operation: How do you remove the rear bumper of the Citroà «n C3?

To be able to remove the rear bumper of the Citroà «n C3, you have to open the hood and remove the side grilles inside the luggage compartment, in correspondence with the headlights. Inside the grilles, there will be knobs that will need to be unscrewed in order to extract the headlights from their housing. Inside the housings, there will be screws that secure the bumper, which will need to be loosened; the other screws to loosen will be inside the wheel arches. Once all these have been removed, it will be possible to detach the bumper, also disconnecting the connectors.


Posted on 27 June 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos