Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Rear bumper

Before starting, open the tailgate of your Citroen C3. Begin by unclipping and removing the plastic clips that secure the bumper. Next, unscrew and remove the screws that hold the rear lights in place, disconnect the corresponding plugs, and finally remove the lights themselves. This will expose all the fastening bolts, which you will need to remove using a 10 mm spanner. Once you have removed all the clips and bolts, the rear bumper will be free to extract, completing the disassembly.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Citroen C3
How to Remove the Rear Bumper of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the rear bumper of a Citroen C3? Follow these steps: using a screwdriver or battery-powered drill, unscrew the securing pins locate…
How to Remove the Front Bumper from a Citroen C3
How to Remove the Front Bumper from a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the front bonnet of your Citroen C3. Begin by unscrewing and removing the screws located on the upper side of the bumper using …
Removing the Front Bumper of the Citroen C3
Removing the Front Bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Below are the instructions to remove and replace the front bumper of the Citroen C3. First, open the bonnet of your car and start unscrewing the fixi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos