Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Citroen C4 2.0 HDI

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Clutch

Follow the main steps to remove and replace the clutch discs on the Citroen C4 as outlined below. First, lift the vehicle and remove the front wheels, disconnecting the drive shafts from the gearbox. Open the bonnet and remove the battery, taking out the engine support located underneath and disconnecting the various wiring, as shown in the video. Next, unscrew the bolts of the gearbox casing to access the clutch; replace the discs with new ones, following the video tutorial to the end!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch of the Citroën C4 1.6 HDi?
How to replace the clutch of the Citroën C4 1.6 HDi?
Citroen C4 (2010-2018 / MK 2) To replace the clutch of the Citroën C4 1.6 HDi, lift the car with a jack or ramp so that the front wheels are off the ground: these must now be comp…
Replacing the Air Filter on a Citroen C4 1.6 HDI
Replacing the Air Filter on a Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) In today's tutorial video, you will see how to remove and replace the engine air filter on the first series Citroen C4 with a 1.6 HDI engine. First, …
Reset Service Light on a Citroen C4 1.6 HDI
Reset Service Light on a Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to reset the service light for routine maintenance on a Citroen C4 first series with a 1.6 HDI engine. First, get inside th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos