Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Pump and Float from Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel pump

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the fuel pump (including the float) from a Citroen C4. First, note that the float is located at the rear of the car, under the rear seat: remove the seat and take off the protective cap to access the float.

Next, disconnect the electrical connector and then disconnect the fuel hose; then unscrew the retaining ring to extract the fuel pump.

At this point, replace it with the new one and then reassemble everything!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump of the Citroen C4
Replacing the Fuel Pump of the Citroen C4
Citroen C4 (2004-2010 / MK 1) This guide will show you the main steps to remove and replace the fuel pump of the Citroen C4. First, open the rear doors and start by removing the r…
Removing the Radio from a Citroen C4
Removing the Radio from a Citroen C4
Citroen C4 (2004-2010 / MK 1) In today's video tutorial, we will see how to remove the radio from a first-generation Citroen C4 in simple steps. First, get inside the car and inse…
Where are the Fuses in a Citroën C4?
Where are the Fuses in a Citroën C4?
Citroen C4 (2010-2018 / MK 2) The fuse boxes in a Citroën C4 contain the fuses that control the operation of the devices installed in the car. In this type of vehicle, there are t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos