Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Gladiator
    4. : Central tunnel

Jeep Gladiator - Central tunnel

Jeep Gladiator (2020-2024 / JT)
How do you disassemble the central tunnel of the Jeep Gladiator?
In order to remove the central tunnel of the Jeep Gladiator you need to loosen the two screws that secure the plastic cover at the rear, accessing from the …read all…
Posted on 7 May 2024 by ScegliAuto
Loudspeaker (1) Car stereo (1) Key (5) -board computer (1) Checks and maintenance (3) Rear bench seat (1) Tail light (2) Air filter (3) Cabin air filter (2) Headlight bulb (2) Rear light bulb (1) Power Steering Motor (1) Engine oil (5) Door panel (1) Wheel (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos