Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Door Speaker of a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Speaker

This video is currently unavailable

Before starting, open the front door of your Jeep Renegade. Begin by removing the door panel, disengaging the inserts and the window switch, then unscrew the fixing screws and detach the door panel.

This will reveal the screws securing the speaker to the door. Proceed by unscrewing and removing these screws.

At this point, extract the speaker from its housing, then disconnect the electrical connector, completing the disassembly. To install the new speaker, reverse this procedure, and the replacement will be finished.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Speaker from a Jeep Renegade
How to Remove the Front Speaker from a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide, you will see the steps necessary to remove and replace the front speaker of the Jeep Renegade. First, open the front door and begin to…
Guide to replacing the speakers in the Jeep Renegade
Guide to replacing the speakers in the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide we will see the main instructions on how to disassemble and replace the front door speaker of the Jeep Renegade. First, we open the fro…
How to Remove the Speakers from a Jeep Renegade
How to Remove the Speakers from a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How do you remove the speakers located in the door panel of a Jeep Renegade? Before starting the disassembly, disconnect the battery terminals locate…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos