Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Backup Camera on the Jeep Gladiator?

Model: Jeep Gladiator JT - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

To install the backup camera on the Jeep Gladiator, lower the rear tailgate to access the screws securing the inner panel. Once these screws are removed, detach the panel to access the components inside, removing an additional steel panel in the center area.

Underneath, you will find the old backup camera, which must be disconnected from the connectors to connect and install the new one. After installation, reattach the inner panels of the tailgate.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
How to Remove the Front Door Panel of the Jeep Gladiator
How to Remove the Front Door Panel of the Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) In this guide, we will go through the necessary steps to remove and replace the front door panel of the Jeep Gladiator. First, open the front door an…
DIY Upgrades for a Jeep Gladiator
DIY Upgrades for a Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) Easy and low-cost upgrades you should have on your Jeep Gladiator: let's start with the cup holders that our YouTuber installed on the front doors. T…

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos