Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the key remote for a Kia Picanto

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Replacing the battery of the key remote for a Kia Picanto car is a simple operation to perform. As shown in the tutorial in question, you will simply need a new battery of the correct model, namely a CR 2032 3V. Take the vehicle remote and press the button located in the upper corner above the shell, this will release the metal key inside; at this point, use your fingers to lever outwards from the edge where the key was housed.

By levering outwards, you will remove the back cover of the remote shell and have access to the battery compartment; proceed to remove and replace the battery.


Posted on 9 February 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Kia Picanto?
How to Replace the Remote Battery on a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To replace the remote battery on a Kia Picanto, use a tool to pry apart the two halves of the remote casing. Once open, you will find the battery ins…
Replacing the Key Battery on a Kia Picanto
Replacing the Key Battery on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Let's see how to change the battery in the remote key for a Kia Picanto. Take your remote key and, using a screwdriver, unscrew the tiny screw on it,…
How to replace the key battery of the Kia Picanto 2018
How to replace the key battery of the Kia Picanto 2018
Kia Picanto (2011-2018 / TA, MK 2) Replacing the battery inside the key of your Kia Picanto second series (2018) takes just a few seconds, and with this guide, you will complete it wit…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos