Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Indicator in the Mirror of a Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side mirror

See other generations:
Video tutorial

Need to replace the indicator in the Kia Rio? Let’s see how to remove the mirror to access the indicator. Pry between the edge of the mirror frame and the mirror glass.

Keep prying until the mirror comes off. Once removed, disconnect the power connector for the glass. Unscrew the securing screws of the mirror cover.

Remove the mirror cover and then the indicator (disconnect the electrical cable). Replace the indicator bulbs or the entire unit.

Secure the new part inside the mirror and screw all the securing screws back in.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Kia Rio 3
How to Replace the Cabin Air Filter on a Kia Rio 3
Kia Rio (2011-2017 / UB, MK 3) If you intend to replace the cabin air filter on your Kia Rio third generation yourself, follow the steps described below. First, ensure you have a n…
How to program the remote control of the Kia RIO key
How to program the remote control of the Kia RIO key
Kia Rio (2005-2011 / MK 2, DE) Below we will see the steps on how to program the remote key for the Kia RIO. First, let's get inside the vehicle and make sure all the doors are clo…
How to Fold Down the Rear Seats of a Kia Rio
How to Fold Down the Rear Seats of a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Before you can start, open the rear doors of your Kia Rio. Then, enter the cabin. This will allow you to reach the clips that hold the rear seats in …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos