Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speaker on a Kia Cadenza

Model: Kia Cadenza K7 MK  1, VG - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Speaker

See other generations:
Video tutorial

To replace the speaker on a Kia Cadenza, first remove the corresponding door panel: loosen the bolts that secure it to the door, located at the handle and the lower area. Once the panel is detached, unscrew the bolts that secure the speaker in its housing and disconnect the connector.

This way, you can connect the new speaker to the wire, securing it in place with the bolts and reinstalling the door panel.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Kia Cadenza?
How to Replace the Battery on a Kia Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) To replace the battery on a Kia Cadenza, open the hood to access the components inside the engine compartment: on the right side, near the left headl…
What is the Fuse Diagram for the KIA Cadenza?
What is the Fuse Diagram for the KIA Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) In this video, you can see the fuse diagram and the location of the respective boxes in the KIA Cadenza. This is useful if a device is malfunctioning…
How to Replace the Remote Battery in the KIA Cadenza?
How to Replace the Remote Battery in the KIA Cadenza?
Kia Cadenza K7 (2016-2021 / MK  2, YG) In this tutorial, you will see how to replace the remote battery in the KIA Cadenza. For this simple and quick operation, you won't need any special …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos