Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Kia Venga?

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

Video tutorial

Tyre pressure is extremely important for vehicle safety. If the tyre pressure light is illuminated, investigate the cause, as it is likely due to under-inflated tyres.

The video demonstrates how to check the inflation pressure using a simple manual gauge and how to proceed if it is below the required level. Bringing the value within a safe range is straightforward, for example, using a lightweight, portable electric compressor.

Once done, the light will automatically turn off.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…
How to Reset the Trip Meter in a KIA Venga?
How to Reset the Trip Meter in a KIA Venga?
Kia Venga (2010-2019 / MK 1) In this tutorial, we will see how to reset the trip meter in a KIA Venga, a very simple and quick operation. This trip meter can be very useful for t…
How to Replace the Air Conditioning Filter on a Kia Venga
How to Replace the Air Conditioning Filter on a Kia Venga
Kia Venga (2010-2019 / MK 1) Sit in the front passenger seat of your Kia Venga. Open the glove compartment. Next, unscrew and remove the screws securing the air conditioning filt…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos