Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Kia Picanto

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Start by performing the preliminary steps for the replacement. You will need to disengage the bonnet from the latch to lift and secure it with the support rod. Disconnect the battery terminals to protect any delicate circuits and the bulbs themselves.

Then, unscrew the bolts securing the headlamp and disconnect the connectors behind each headlamp. Extract the entire headlamp and remove the rear cover from each headlamp to access the bulb positions.

This way, you can replace the affected bulbs, and you're done!


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Kia Picanto
How to Replace the Front Headlamp Bulb on the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) The steps to replace the front headlamp bulb on a Kia Picanto are simple and quick to perform independently. The first step is to open the bonnet. Th…
How to Replace the Front Headlamp Bulb on a Kia Picanto 2
How to Replace the Front Headlamp Bulb on a Kia Picanto 2
Kia Picanto (2011-2018 / TA, MK 2) To replace the front headlamp bulb on your Kia Picanto second series (2011-2018), follow these simple steps. First, switch off the car and lift the b…
How to Replace the Front Headlamp Bulb in a Kia Picanto
How to Replace the Front Headlamp Bulb in a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the left front headlamp bulb in a Kia Picanto is a very simple and quick task to perform independently. Start the procedure by turning the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos