Do it yourself
Frequently asked questions about cars and motorcycles
The replacement of the motor oil on the Kymco Xciting 400 can be done by unscrewing the drain plug of the oil tank, located in the central lower part of the vehicle: it will be possible to drain all the used oil into a properly positioned container. Next to the drain plug, you can also locate the oil filter, which must be removed from its housing and replaced with a new spare part. After the replacement, it will be necessary to top up the oil by inserting the new oil through the vent located on the left side of the vehicle.

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Xciting 400 To perform the oil change of the Kymco Xciting 400 gearbox, you need to loosen the oil drain plug, located at the bottom rear of the transmission cas…
Xciting 400 In today's video, see how to replace the original footrests on the Kymco Xciting 400. This operation may be necessary when the footrest covers are wo…
Xciting 400 You can replace the clutch on the Kymco Xciting 400 by loosening the screws that secure the cover near the rear wheel on the left side of the bike: o…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos