Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Yamaha XMax 250
How to reset the service indicator on the Yamaha XMax 250
Xmax 250 The manual reset of the service light on the central panel of your Yamaha XMax 250 can be completed without any difficulty even if you are on your ow…
How to Replace the Spark Plug on a Yamaha Xmax 250
How to Replace the Spark Plug on a Yamaha Xmax 250
Xmax 250 This guide provides instructions for removing and replacing the spark plug of the engine on the Yamaha Xmax 250 scooter, as well as the Xmax 125. Fir…
How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial we can see how to adjust the time on the Yamaha XMAX 250 scooter, an extremely simple and quick operation, to be carried out for exa…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos