|
Do it yourself
| |||
| ||||
Model: Lml Lml 125
In this video, you will see how to remove the air filter from an LML 125 2-stroke. First, remove the side panel of the engine; then unscrew the screws of the air filter cover, located near the carburettor, as shown in the video. At this point, use a screwdriver to unscrew the air filter screws to remove it from the carburettor; clean it before refitting or replace it directly with a new one. Finally, refit the filter and replace the cover, following the video tutorial to the end!
Updated on 4 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Lml 125
Before you begin, position your LML Star 125 on the centre stand. Start by unscrewing and removing the nuts that secure the front wheel to the hub, t…
Lml 125
To replace the brake cable on an LML 125, you need to loosen the two bolts securing the ends of the cable: these will be located at the brake caliper…
Lml 125
To replace the clutch on the LML 125, open the engine side cover located on the right side of the bike. Once the fixing bolts of the cover have been …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.092
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
