Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Lml
    3. :
  3. Lml 125
    4. : How to replace the rear jaws of the Lml Star - Piaggio Vespa PX

Model: Lml Lml 125
Part: Brake pads
How to replace the rear jaws of the Lml Star - Piaggio Vespa PX

In today's video tutorial we will see how to remove and replace the rear brake shoes of the Lml Star, but also of the Piaggio Vespa PX. First we go to put the central stand and start by removing the side case; after which we unscrew the screws of the spare wheel to remove it, as shown in the video. At this point we unscrew the wheel screws, lifting the vehicle; we remove the cotter pin of the drum and unscrew the central nut to remove it. Now let's proceed with the disassembly of the old jaws and replace them with the new ones, cleaning up the dirt!


Posted on 23 September 2022 by ScegliAuto

How do you disassemble the engine of the TM Racing EN 250?

To disassemble the engine of the TM Racing EN 250, you need to loosen the screws that fix the engine block to its housing: by loosening the screws that fix the engine to the frame, you will also be able to loosen those that fix the intake and exhaust pipes, then disconnect the connectors related to the sensors. In this way, you can proceed by removing the cylinder from the top and disconnecting the piston inside from the connecting rod; at this point, you can remove the connecting rod from the engine shaft and access the additional components at the base of the engine block.

Watch the video!


by ScegliAuto

More videos