Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mahindra Quanto - Key

Mahindra Quanto (2012-2020 / MK 1)
How to program the key of Mahindra Quanto.
Today, in this video tutorial, we will see how to program the key of the Mahindra Quanto, following the instructions below. To be able to program the key, it …read all…
Posted on 3 April 2023 by ScegliAuto
Mahindra Quanto (2012-2020 / MK 1)
How do you replace the key shell on your Mahindra Quanto?
In order to replace the key shell of the Mahindra Quanto you need to lever on the side of the device, so that it can be opened giving access to the components …read all…
Posted on 9 April 2023 by ScegliAuto
Mahindra Quanto (2012-2020 / MK 1)
How to cover the remote key of the Mahindra Quanto
In the event that our remote control key is quite damaged and with a little wear at the controls, we can think of buying a new cover after the market that is …read all…
Posted on 6 April 2023 by ScegliAuto
Key (3) Timing belt (1) V-belt (1) Checks and maintenance (1) Cabin air filter (1) Engine oil (1) Wheel (1) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos