Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Scorpio Goa Getaway
    4. : Cabin air filter

Mahindra Scorpio Goa Getaway - Cabin air filter

Mahindra Scorpio Goa Getaway (2009-2014 / MK 2)
How to replace the cabin air filter on the Mahindra Scorpio.
If we want to replace the cabin air filter on this car model because we have noticed a significant reduction in the air flow coming out of the vents, in the …read all…
Posted on 9 June 2023 by ScegliAuto
Mahindra Scorpio Goa Getaway (2014-2023 / MK 3)
How to replace the cabin air filter on the Mahindra Scorpio.
Do we want to replace the cabin air filter on this car? In the description below, we will find all the information and necessary steps to carry out the …read all…
Posted on 29 April 2023 by ScegliAuto
Mahindra Scorpio Goa Getaway (2014-2023 / MK 3)
How to replace the cabin filter in the Mahindra Scorpio?
As we can see in this tutorial, replacing the cabin air filter in the Mahindra Scorpio is a very quick and easy operation. The first thing to do, since it is …read all…
Posted on 16 May 2024 by ScegliAuto
Battery (2) Arm (1) Key (2) -board computer (3) Checks and maintenance (2) Air filter (2) Cabin air filter (3) Accessory Kit (1) Engine oil (1) Door panel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos