Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv700
    4. : Checks and maintenance

Mahindra Xuv700 - Checks and maintenance

Mahindra Xuv700 (2021-2024 / MK 1)
Guide to using the automatic transmission of the Mahindra Xuv700.
Let's take a look at the main instructions on how to correctly use the automatic gearbox of the Mahindra Xuv700 in this guide. First, we get into the car and …read all…
Posted on 26 April 2023 by ScegliAuto
Mahindra Xuv700 (2021-2024 / MK 1)
How do you unlock the fuel flap on the Mahindra Xuv700?
When the fuel filler flap of your Mahindra Xuv700 gets stuck due to low battery charge or any other general problem, there is an emergency unlocking procedure …read all…
Posted on 4 June 2023 by ScegliAuto
Mahindra Xuv700 (2021-2024 / MK 1)
How to change Mahindra Xuv700 cluster view
Let's find out in this short and simple guide the main steps that will allow us to change the display of the Mahindra Xuv700 instrument cluster. First of all, …read all…
Posted on 7 December 2022 by ScegliAuto
Mahindra Xuv700 (2021-2024 / MK 1)
How to reset the service in the Mahindra XUV700?
In this tutorial we can see how to reset the service in the Mahindra XUV700, a very simple and fast operation, to be performed only after completing all the …read all…
Posted on 5 May 2024 by ScegliAuto
Mahindra Xuv700 (2021-2024 / MK 1)
How to reset the service in the Mahindra XUV700?
As we can see in this tutorial, resetting the service in the Mahindra XUV700 is a very simple operation. Before proceeding we must have completed all the …read all…
Posted on 3 May 2024 by ScegliAuto
Bodywork (1) Key (1) Checks and maintenance (5) Cabin air filter (1) Handle (1) Engine oil (1) Door (1) Wheel (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos