Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes Sprinter?

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Service warning light

To reset the service light on a Mercedes Sprinter, connect a diagnostic tool to the vehicle's OBD port: this will be located in the lower part of the dashboard near the steering column. Once connected, select the vehicle model and its corresponding version: then follow the on-screen instructions to reset the light. You can complete the procedure by turning off the ignition after removing the scanner from the OBD port.

Posted on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Mercedes Sprinter?
How to Reset the Service Light on a Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) To correctly reset the Service light on a Mercedes Sprinter, follow these steps: first, insert the ignition key and turn on the instrument panel with…
How to Reset the Service Light on a Mercedes Sprinter?
How to Reset the Service Light on a Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The Service light on a Mercedes Sprinter can be reset by turning on the ignition and holding the 0 button for a few seconds until you hear a beep and…
How do you reset the Service indicator light in the Mercedes Sprinter?
How do you reset the Service indicator light in the Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) Here is how to reset the Service light on your Mercedes Sprinter, remembering that the reset of the warning should only be done after changing the en…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos