Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change Cabin Fuses on Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Fuse box

Are the fuses in your Mercedes E-Class damaged? Let's remove the fuses located inside the front dashboard. Remove the cover in the fuse compartment on the left side of the dashboard. Use needle-nose pliers to pull out the damaged fuses from the compartment. Once this is done, insert the new fuses into their designated slots in the compartment. Turn on the instrument cluster and test the electrical components after replacing all the damaged fuses. Close the fuse inspection box with the cover after maintenance.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Cabin Fuse Box in a Mercedes E-Class W211?
Where is the Cabin Fuse Box in a Mercedes E-Class W211?
Mercedes Classe E (2002-2009 / W211) .. the cabin fuse box is located in your Mercedes E-Class W211, don't worry because the following guide describes all the steps you need to follow. First,.. …
Fuse Diagram and Placement for Mercedes E-Class
Fuse Diagram and Placement for Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. placement of the fuse boxes for the Mercedes E-Class. First, open the hood of the vehicle and start removing the plastic cover found at the top right.. …
Mercedes E-Class Fuse Box
Mercedes Classe E (2002-2009 / W211) This vehicle has 3 fuse boxes. The first is located in the cabin on the left side of the dashboard behind the driver's side access panel. To access i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos