Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Inner Side Trim on a Mercedes S-Class Coupe

Model: Mercedes Classe S MK 6, W222 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear inner side trim on a Mercedes S-Class Coupe. First, access the back of the car by sliding the front seat forward; then remove the side molding and detach the silver trim of the cover by prying it with something thin.

Next, unscrew the screws located underneath and remove the seatbelt anchor bolt found at the bottom; then pull out the bracket located inside, as shown in the video. Finally, remove the trim!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Replacing Antenna on Mercedes S-Class
Replacing Antenna on Mercedes S-Class
Mercedes Classe S (1991-1998 / W140, MK 3) Is the antenna on your car damaged? Let's go through the process of removing and installing the antenna on a Mercedes S-Class. Open and lift the trun…
How do you reset the AdBlue warning light on the Mercedes S-Class?
How do you reset the AdBlue warning light on the Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) In order to reset the AdBlue warning light on the Mercedes S-Class, it is necessary to refill the tank with the necessary amount of additional fluid:…
Fuse Box Diagram and Location for the Mercedes S-Class
Fuse Box Diagram and Location for the Mercedes S-Class
Mercedes Classe S (2013-2020 / MK 6, W222) Discover the information regarding the diagram and location of the fuse boxes for the Mercedes S-Class. First, open the front door of the vehicle and…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos