|
Do it yourself
| |||
| ||||
Model: Moto Guzzi V65
To replace the rear shock absorber on the Moto Guzzi V65TT, loosen the screws securing it to its housing. These screws are located at the top and bottom of the component. Once it is freed from the screws, which are accessible from the side of the frame, detach it completely to install the new one. The new shock absorber must be secured with screws at both the top and bottom. After installation, verify that everything functions correctly.
Posted on 25 July 2026 by ScegliAuto
Video tutorial
Related tutorials
V65
To change the engine oil of the Moto Guzzi V65, loosen the drain plug of the oil tank, located at the central lower part of the vehicle: once the plu…
V65
This guide shows you how to start the Moto Guzzi V65 Cafe Racer. The first step is to position the motorcycle securely. Next, use the ignition key, i…
V65
In order to disassemble the gearbox of the Moto Guzzi V65, you need to completely loosen the screws that secure the box to the corresponding supports…
|
Replacing the Front Brake Pads on the Piaggio Vespa 50 LX
This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
