Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Want to change the front headlamp bulbs on an Opel Corsa? Follow these steps: open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it. Remove the air intake pipe next to the headlamp along with the filter box. Once the filter box is removed, locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulb using a screwdriver.

Install the new bulb (make sure it is the correct type and size) and insert the bulb holder back into the headlamp housing.

Reassemble all the previously removed parts.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulbs on an Opel Corsa
How to Replace the Rear Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear headlight of your Opel Corsa no longer working? Learn how to replace the rear headlight bulbs. Open the boot lid, then remo…
Removing the Front Headlamp Bulbs on an Opel Corsa
Removing the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the car headlamp bulbs damaged? Let's look at removing the faulty bulbs from the headlamps of an Opel Corsa. Lift the front bonnet of the car and…
How to Replace the Headlamp Bulb on an Opel Corsa
How to Replace the Headlamp Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the blown bulbs inside the headlamp of an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashboard…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos