Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Headlight bulb

Follow these simple steps to replace the front headlamp bulbs on your vehicle. Start by removing the left inner cover; simply unlock the catch and slide off the cover as shown in the video. Now, remove the affected bulbs, taking care to note the orientation of the connector and the associated wires. Avoid touching the bulb to prevent burning it out shortly after replacement. Additionally, ensure the beam orientation is correct for your safety. The right side is similar, where the process is easier due to more space.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on an Opel Corsa
How to Replace the Headlamp Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the blown bulbs inside the headlamp of an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashboard…
How to Replace the Front Headlamp Bulbs on an Opel Corsa
How to Replace the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Learn how to replace the front headlamp bulbs on an Opel Corsa. Release the front bonnet by pulling the lever located at the bottom right of the dash…
Removing the Front Headlamp Bulbs on an Opel Corsa
Removing the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the car headlamp bulbs damaged? Let's look at removing the faulty bulbs from the headlamps of an Opel Corsa. Lift the front bonnet of the car and…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos