Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Shock Absorber from a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Shocks

Want to remove the rear shock absorber from a Peugeot 307? Follow these steps carefully: loosen the wheel nuts with a suitable tool (telescopic spanner or air drill), lift the car on a column lift, and remove the wheel. Use a socket to unscrew the fastening bolts of the shock absorber (at the top and bottom), lower the car with the column lift, and unscrew the bolt on the side in the boot (if this option is available). Remove the shock absorber from its housing. Compare the old part with the new one and prepare for installation: insert the shock absorber into its housing, first tighten all the bolts at the top of the shock absorber, then secure the bottom to the wheel hub. Finally, refit the wheel with the respective nuts.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on a Peugeot 307
How to Remove the Rear Door Panel on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before you can start, open the rear door of your Peugeot 307. Begin by prying off and removing the trim around the inner handle and the window switch…
How to Remove the Rear Door Panel on a Peugeot 307
How to Remove the Rear Door Panel on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this tutorial, we will see how to remove the rear door panel on a Peugeot 307. For this simple and quick operation, you will need a T20 Torx key, …
Guide to Removing the Rear Bumper of the Peugeot 307
Guide to Removing the Rear Bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this short and simple guide, learn how to remove and replace the rear bumper of the Peugeot 307, following the instructions below. First, move to …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos