Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light Assembly in Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

In this video, you will see how to remove the rear light assembly and replace the burnt-out bulb in a Peugeot 307. First, open the boot lid and remove the side cover covered in carpet. Then, unscrew the central plastic screw and pull out the rear light assembly from the outside, as shown in the video. At this point, disconnect the electrical connector of the light by pressing the tab and remove the bulb holder with all the bulbs; now twist them to remove and replace with new ones. Reassemble everything in reverse order!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Glass of the Peugeot 307 CC
How to Replace the Rear Light Glass of the Peugeot 307 CC
Peugeot 307 (2001-2009 / MK 1) Replacing the outer glass of the rear light of a car means that the latter is damaged. The procedure is fully shown in the attached video, using very…
How to Replace the Reverse Light Bulb on a Peugeot 307
How to Replace the Reverse Light Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below is the procedure necessary to independently replace the reverse light bulb on your Peugeot 307. First, ensure you have a new reverse bulb that …
How to Remove the Rear Light of a Peugeot 307
How to Remove the Rear Light of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Want to remove the rear light of a Peugeot 307 but don't know how? No problem, follow these steps: open the boot, remove the cover cloth of the rear …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos