Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlining of a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009

In this guide, you will discover the main steps to remove and replace the headlining of a Peugeot 307. First, get inside the vehicle and start removing the roof grab handles by unscrewing the fixing screws; then unscrew the plastic clips found on the headlining, subsequently removing the sun visors and the interior light unit (using a plastic lever and disconnecting the electrical connectors), as shown in the video. At this point, pry at the sides to finally remove the headlining, following the video tutorial to the end!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel on Peugeot 307
Removing the Rear Door Panel on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let’s look at removing the covering panel of the rear door on a Peugeot 307. Remove the covering panel to access the faulty speaker. Use a lever to r…
Guide to dismantling the roof headlining of the Peugeot 307 SW.
Guide to dismantling the roof headlining of the Peugeot 307 SW.
Peugeot 307 (2001-2009 / MK 1) Today's guide will show us the main steps on how to disassemble and repair the headliner or interior roof lining of the Peugeot 308 SW. First, let's …
How to disassemble the internal roof lining of the Peugeot 307
How to disassemble the internal roof lining of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the internal roof lining of the Peugeot 307. First of all, we get on…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos