Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 307
  6. : Disassembly of the fuel pump of the Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Fuel pump
Operation: Disassembly of the fuel pump of the Peugeot 307

In today's video tutorial we will see the instructions on how to disassemble and replace the fuel pump or the float of the Peugeot 307. First we access the back of our car and start removing the sofa; after which we remove the plastic cover and disconnect the petrol pipes, as shown in the video. At this point we disconnect the electrical connector of the fuel level sensor and then unscrew the ring nut of the pump; replace the fuel pump with the new one, of the right type, and reassemble everything, applying the reverse procedure!


Posted on 6 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - Where is the Booster Pump located in a Peugeot 307? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos