Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Service warning light

Today with the help of our short video tutorial, we will explain the steps to follow to reset the maintenance light of the Peugeot 307. The first step is to get into the car and insert the key into the ignition switch to turn on the vehicle's instrument panel. The second step is to press the button on the odometer until the service light starts flashing. Keep the button pressed until the countdown starts on the display; when the number 0 appears on the display, release the button. The third step is to turn off and turn on the instrument panel to verify that the reset was successful.

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 307?
How to Reset the Service Light on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) On the Peugeot 307, to reset the Service light, press and hold the button located on the right side of the display, next to the speedometer. While ho…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) When the service light comes on in the Peugeot 307, it means that the driver must carry out a complete check of the vehicle. After performing the ser…
How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Resetting the service light on the display of your Peugeot 307 is very simple. To complete the operation, just carefully read the following guide and…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos