|
Do it yourself
| |||
| ||||
Model: Piaggio Bv 400
To replace the engine oil of the Piaggio BV 400, loosen the screws securing the oil drain plug located at the central lower part of the bike: once this plug is loosened, you can collect all the used oil in a suitably positioned container. The oil filter is in the same location and can now be removed from its seat, inserting the new one. After installation, top up with the necessary amount of oil from the breather located on the right side of the bike.
Updated on 12 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Bv 400
The replacement of the engine oil of the Piaggio BV 400 can be done by loosening the drain plug of the oil pan, located in the central lower part of …
Bv 400
The procedure for replacing the engine oil of the Piaggio BV 400 can be carried out by loosening the screws that secure the drain plug of the oil pan…
Bv 400
In order to replace the air filter of the Piaggio BV 400, you need to unscrew the screws that secure the cover of the crankcase near the rear wheel, …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |