Do it yourself
Frequently asked questions about cars and motorcycles

How to Install LED Dipped Beam Lights in a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, you will see how to install H7 LED dipped beam bulbs in a Renault Clio 4 by following some simple steps that guide you through the correct management of your vehicle. The first thing you need to do is purchase a pair of H7 LED bulbs from an authorised car parts dealer or buy them online.

Lift the bonnet and secure it with the prop rod. Remove the protective cap of the bulb, disconnect the connector, and remove the spring; at this point, the bulb will come out. Now, unscrew the disc-shaped plastic cap from the bulb. Take the disc-shaped cap, position it in place, and refit the spring (as shown in the video).

Now connect the connector to the bulb (avoid touching the bulb with greasy hands; if you do, clean the bulb with a clean cloth before inserting it); once the connector is inserted, turn on the vehicle to check the bulb's operation. After the check, insert the bulb into the slot (centering it, of course), and twist the bulb to secure it in place.

Insert the wires into the hole and reposition the protective cap.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you will learn how to replace the H7 dipped beam bulbs on the Renault Clio. In this case, we will install bulbs different from traditi…
Renault Clio (1998-2005 / MK 2, Clio 2) In our other tutorials, we show you how to replace the bulbs on Renault Clio 3 and 4; here, we demonstrate on a Renault Clio 2. Working with the engi…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide will show you how to remove and replace the front headlamp bulb on the Renault Clio, following these simple instructions. First, open the …

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos