Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Saab 9-5 third stop replacement

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part:

How do you remove the third rear light of the Saab? Let's see the disassembly of the headlight placed in the tailgate of the car. We lift the tailgate, then we find the fastening screws of the third headlight. We unscrew the screws located behind the spotlight. As soon as the spotlight is free from any constraint, we can disconnect it from inside the hatch (disconnect the relative power supply terminals). We assemble the new spotlight: connect the power supply terminal, insert the spotlight in the tailgate (after having mounted the bulbs) and screw the tightening pins of the same. We test the operation of the bulbs and the whole spotlight.

Posted on 3 April 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the LPG injectors from the Saab 9-5.
How to remove the LPG injectors from the Saab 9-5.
Saab 9 5 (1997-2010 / Ys3e, MK 1) .. disassemble and replace the LPG injectors of the Saab 9-5. First of all, we open the engine hood of our car and start by disconnecting the LPG pipe located.. …
How to replace the crankshaft position sensor in the Saab 9-5?
How to replace the crankshaft position sensor in the Saab 9-5?
Saab 9 5 (2010-2012 / Ys3g, MK 2) .. to replace the crankshaft position sensor in the Saab 9-5, a very simple and quick operation. First of all, make sure that the engine is completely cold,.. …
How to replace the battery of the Saab 9-5 key.
How to replace the battery of the Saab 9-5 key.
Saab 9 5 (1997-2010 / Ys3e, MK 1) .. If you want to replace the battery of your Saab 9.5 first generation key (year 1997-2010), all you have to do is follow the steps described in our.. …

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos