Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sherco Sherco 125
Part: Clutch

To replace the clutch of the Sherco 125, you will need to loosen the screws that secure the cover panel located in the lower central part of the left side of the bike: once this panel has been removed, you can proceed to loosen the screws that hold the underlying clutch discs. These can now be removed from their housing so that the new replacement parts can be inserted: after installation, you can close everything with the cover to check its operation.

Posted on 22 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Sherco 125 To reset the Service light that appears on the instrument panel of the Sherco 125, you need to turn on the instrument panel by inserting the ignition…
Sherco 125 In order to disassemble the engine of the Sherco 125, you first need to loosen the screws that fix it to the specific supports located in the center …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos