Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Skoda Fabia

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlamp bulb is very straightforward as there is sufficient space to manoeuvre and nothing needs to be disassembled; therefore, open the front bonnet and remove the cover protecting the headlamp, disconnect the power connector of the bulb, unclip the spring holding it in place and pull it out; then insert the new bulb (H7 fitting) orienting it correctly and being careful not to touch the glass with your hands; once aligned and inserted, secure the new bulb by reattaching the spring, reconnect the power connector and reposition the cover.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace Headlight Bulb on Skoda Fabia
How to Replace Headlight Bulb on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Let's see how to remove the headlight bulbs from the front of a Skoda Fabia. Open the bonnet by pulling the lever located at the bottom right of the …
Replacing the Front Headlamp Bulb of the Skoda Fabia
Replacing the Front Headlamp Bulb of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) This guide will show you the procedure for removing and replacing the position bulb of the front headlamp of the Skoda Fabia. First, open the bonnet …
Replacing the Front Headlight Bulb on a Skoda Fabia
Replacing the Front Headlight Bulb on a Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) This guide provides instructions on how to remove and replace the front headlight bulb on a Skoda Fabia. First, open the bonnet of the vehicle and st…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos