Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to replace headlight bulb on Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Side turn signal light bulb
Operation: How to replace headlight bulb on Skoda Fabia

Let's see how to remove the headlight bulbs of a Skoda Fabia. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. Once we have found the inspection cap of the headlight (located in the rear part of the headlight), remove it. Once here, we will find the headlight bulbs: take out the lamp holders from the headlight and go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We unclip the arrow bulb at the top of the cover in the back of the headlight.


Posted on 6 January 2024 by ScegliAuto



How to replace the bulb in the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Replacing a bulb in the Skoda Fabia has never been so easy, thanks to the help of this short video tutorial. The steps to follow are simple and quick
How to replace the front right headlight bulb of the Skoda Fabia 3.
Skoda Fabia (2014-2021 / NJ, Mark3) Replacing the right front headlight bulb of the Skoda Fabia 3 is a task that can be done independently thanks to our following video tutorial. The fi
How to replace light bulbs on Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Let's see how to replace the bulbs in the headlight on Skoda Fabia. We open the bonnet by pulling the lever located at the bottom right of the dashbo

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos