|
Do it yourself
| |||
| ||||
Replacing a Rear Light Bulb on a Skoda Fabia
Model: Skoda Fabia
Mark3, NJ
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
To replace a rear light bulb, open the boot and using a Torx 30 bit (if you don't have one, you can also try using an Allen key), unscrew the two screws. Once the screws are removed, pull the light unit to disengage it from the clips, taking care not to damage the plastics. Disconnect the electrical connections. From the inside of the light unit, slightly rotate the bulb holder counterclockwise to remove the blown bulb. Replace it with a new one, insert the bulb holder back into the light unit, reconnect the wiring, and reposition the light unit, first pressing the side to click it back in and then re-screwing the two screws.
Updated on 22 May 2026 by ScegliAuto
Related tutorials
Skoda Fabia
(2014-2021 /
Mark3, NJ)
The first step in replacing the key battery of a Skoda Fabia is to insert a flathead screwdriver into the side where the ignition key usually rests. …
Skoda Fabia
(1999-2007 /
Mark1, 6Y)
Thanks to this brief video tutorial, we can see the position of the fuse boxes, along with all the relevant fuse diagrams showing name, position, and…
Skoda Fabia
(1999-2007 /
Mark1, 6Y)
Before you begin, sit in the front seat of your Skoda Fabia. Start by inserting a thin but sturdy tool into the hole located beneath the window switc…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.195
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |