Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to replace the window regulators on a Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Window lift switch
Operation: How to replace the window regulators on a Skoda Fabia

Before we can start, we will have to go and sit in the front seat of our Skoda Fabia. So let's start by inserting a thin but strong tool inside the hole located under the window regulators, and then push. By doing so, we will have released the internal clip that secures the controls to the door panel. We then proceed by going to extract the controls from the relative housing, and then disconnect the relative electrical connector. When we have disconnected the electrical connector, we will be able to permanently remove the window regulators of our Skoda Fabia, and we will have finished the disassembly. To mount the new controls, we will have to follow these steps in reverse, and the replacement will be completed.


Posted on 27 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Fabia 2014-2021 - What to do if the Skoda Fabia power window switch no longer works? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos