Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How do I replace the front indicator light bulb on the Å koda Fabia?

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Light bulb
Operation: How do I replace the front indicator light bulb on the Å koda Fabia?

In order to replace the indicator light bulb on the Å koda Fabia, the hood must be opened to gain access to the engine compartment. In this way it will be possible to remove the bulb from its housing, accessing from the inside of the lighthouse. After the bulb has been removed, it will need to be disconnected from its connector and replaced with a new spare part. By connecting the new bulb to its connector, it will be possible to insert it into its housing and close the hood. After installation it will be necessary to check the correct functioning of the new bulb.


Posted on 12 March 2024 by ScegliAuto



How do I reset the Service indicator on the Å koda Fabia?
Skoda Fabia (2014-2021 / NJ, Mark3) In order to reset the Å koda Fabia Service warning light, press and hold the 0.0 / SET button located in the central part of the instrument panel: wh
How do I reset the Service light on the Å koda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) In order to reset the Å koda Fabia's Serivce warning light, press and hold the button located on the right side of the instrument panel, until the wo
How do I reset the Service light on the Å koda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) In order to reset the Å koda Fabia Service warning light, you need to turn on the instrument panel by turning the appropriate key and accessing the m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos