Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the high beam bulb in the Skoda Fabia?

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Headlight bulb

Here we are with the video guide made to show how to replace the headlight bulb of the Skoda Fabia. After opening the hood, remove the dust cap installed on the back of the headlight, then grab the bulb holder and remove it. Now you need to disconnect the bulb from the holder and replace it with a new one with the same technical characteristics, making sure to test its ignition. The intervention is completed by reassembling everything and following the reverse procedure to the one described above. It is certainly a job that does not require experience and is within everyone's reach.

Posted on 2 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the high beam headlight bulb of the Skoda Fabia 3
How to change the high beam headlight bulb of the Skoda Fabia 3
Skoda Fabia (2014-2021 / Mark3, NJ) In today's article, we will see how to replace the headlight bulb of the Skoda Fabia 3 in case of failure. No tools are required for this procedure. …
Replacing the Headlight Bulbs on a Skoda Fabia
Replacing the Headlight Bulbs on a Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) The main steps today will show you how to remove and replace the headlight bulbs on a Skoda Fabia. First, open the vehicle's bonnet and start by remo…
…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos