Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the high beam headlight bulb of the Skoda Fabia 3

Model: Skoda Fabia Mark3, NJ - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

In today's article, we will see how to replace the headlight bulb of the Skoda Fabia 3 in case of failure. No tools are required for this procedure.

After opening and securing the hood, the cover plug must be removed. Once removed, the bulb connector must be disconnected, and then the bulb can be removed by pulling it outwards.

At this point, the bulb can be replaced. After inserting it into its housing, reconnect the connector and reinsert the cover plug.

Now the procedure will be complete and the bulb will be functioning.


Posted on 24 April 2025 by ScegliAuto


Related tutorials

How do you replace the high beam bulb in the Skoda Fabia?
How do you replace the high beam bulb in the Skoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) Here we are with the video guide made to show how to replace the headlight bulb of the Skoda Fabia. After opening the hood, remove the dust cap insta…
How to Replace the Rear Light Bulb of the Skoda Fabia
How to Replace the Rear Light Bulb of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) This video demonstrates the necessary procedure to replace the rear light bulbs of the Skoda Fabia 2 produced from 2007 to 2014. To replace the bulb,…
How to replace the headlight bulb of the 2017 Skoda Fabia.
How to replace the headlight bulb of the 2017 Skoda Fabia.
Skoda Fabia (2014-2021 / Mark3, NJ) In this new mini guide, we will explain how you can replace the headlight bulb of your Skoda Fabia third series (year 2017). The entire procedure tak…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos