Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Resetting the Service Light

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

Video tutorial

If the SERVICE warning light appears on the instrument cluster display when the ignition is turned on, it means it's time for maintenance, either due to mileage or time elapsed. In any case, regular maintenance must be carried out, including oil and filter replacement, followed by resetting the message: this is a manual operation that does not require computer diagnostics.

Activate the MENU and scroll through the options until you select the settings option, or SETUP. Then select SERVICE INTERVAL, activate the RESET command, and confirm by selecting OK.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How do you reset the service light on the Škoda Yeti?
How do you reset the service light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) By entering the cabin and acting with the instrument panel off, you can reset the Service light of the Škoda Yeti. First of all, you will need to hol…
Resetting the Inspection Warning Light on a Skoda Yeti
Resetting the Inspection Warning Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Let’s briefly go through the steps and instructions that will allow you to reset the service light for routine maintenance on a Skoda Yeti in simple …
How do you reset the Service light on the Škoda Yeti?
How do you reset the Service light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) It will be possible to reset the Service light on the instrument panel of the Škoda Yeti by entering the interior of the cabin and acting with the in…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos