Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Reflectors of the Skoda Yeti

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

Video tutorial

These brief and simple instructions will show you how to remove and replace the rear reflectors of the Skoda Yeti's bumper. First, move to the rear of the vehicle and use a thin plastic lever to gently detach the rear lamp or reflector; take care not to damage or scratch the rear bumper, as shown in the video.

At this point, if necessary, replace the rear reflector with a new one, securing it properly to the bumper; ensure that the rear clips are in good condition.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to remove the rear seats in the Skoda Yeti?
How to remove the rear seats in the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this tutorial, we will see how to remove the rear seats in the Skoda Yeti, a very simple and quick operation, for example, if you want more space …
How to Replace the Rear Light Bulbs in the Skoda Yeti?
How to Replace the Rear Light Bulbs in the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this tutorial, we will see how to replace the rear light bulbs in the Skoda Yeti, a very simple and quick operation. First, ensure that the instru…
How to replace the rear headlight bulbs of the 2011 Skoda Yeti
How to replace the rear headlight bulbs of the 2011 Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Today we will explain how to replace the rear headlight bulbs of the 2011 Skoda Yeti. We open the tailgate and unscrew the two Torx screws using a T …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos