Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Gsx 400

Model: Suzuki Gsx 400
Part: Engine oil

Replacing the motor oil in the Suzuki GSX 400, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the bike, locate the drain plug and unscrew it using a wrench. To facilitate this operation, we can remove the exhaust manifold. Let all the oil in the system drain out, open the filter cap and insert the replacement. At this point, we can reassemble everything and pour the new oil through the appropriate hole.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Suzuki GSX R 750?
How to Change the Engine Oil of the Suzuki GSX R 750?
Gsx R 750 To change the engine oil of the Suzuki GSX R 750, loosen the drain plug located at the lower central area of the bike: this will allow you to collect…
How to Change the Engine Oil in the Suzuki GSX R150
How to Change the Engine Oil in the Suzuki GSX R150
Gsx R 150 Changing the engine oil in the Suzuki GSX R150, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine i…
How to replace the engine oil and oil filter of the Suzuki GSX-R 750.
How to replace the engine oil and oil filter of the Suzuki GSX-R 750.
Gsx R 750 Today's steps will allow us to perform the routine maintenance service by replacing the engine oil and the oil filter on the Suzuki GSX-R 750 motorcy…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos