Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the headlight bulb on the Suzuki GSX-R 750, an extremely simple and quick operation. First, let's make sure that the key is not inserted, so we can operate safely. Then, let's unscrew the indicated bolt using a 4mm hex key, grab the instrument panel, and pull it out of the housing. Next, disconnect the power connector, remove the large rubber cap, and extract the old bulb by turning it slightly counterclockwise. At this point, all that's left is to insert the replacement and reassemble everything by following the reverse procedure.

Posted on 18 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Suzuki GSX-R 750
How to replace the front headlight bulb of the Suzuki GSX-R 750
Gsx R 750 .. bulb of the front headlight of the Suzuki GSX-R 750. First of all, we put the motorcycle on the stand and start unscrewing the screws that secure the.. …
How to Change the Engine Oil of the Suzuki GSX R 750?
How to Change the Engine Oil of the Suzuki GSX R 750?
Gsx R 750 .. To change the engine oil of the Suzuki GSX R 750, loosen the drain plug located at the lower central area of the bike: this will allow you to collect.. …
How to replace the clutch of the Suzuki GSX-R 750
How to replace the clutch of the Suzuki GSX-R 750
Gsx R 750 .. and replacing the clutch discs of the Suzuki GSX-R 750 motorcycle. First of all, we put the motorcycle on the stand and start unscrewing the fastening.. …

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos